Considering semi-permanent fairing mount

Having Garmin zumo XT problems? there is loads of help and advice in this forum
Post Reply
HuntWhenever
Posts: 3
Joined: Tue Jun 15, 2021 3:11 pm
United States of America

Considering semi-permanent fairing mount

Post by HuntWhenever »

I just got a Zumo XT and I am thinking about fabricating a semi-permanent mount on my fairing (FXRT fairing on a Harley Softail). Basic concept as of now is to use the Zumo XT mount and power cable, then make a hood/frame around the unit (probably 3D printed).

For those who have had this GPS unit for a while...any possible issues with having the unit out in the weather and elements on a semi-permanent bases?

20210507.jpg
20210507.jpg (357.96 KiB) Viewed 1215 times
colirv
Posts: 149
Joined: Mon Dec 30, 2019 9:38 am
Location: Tyne & Wear
Has liked: 41 times
Been liked: 35 times
Contact:
Great Britain

Re: Considering semi-permanent fairing mount

Post by colirv »

As regards the weather, I've had no problems, but you may get replies from those that have. My concern would be whether the fairing would provide a solid enough mount.
Colin
BMW R1250RS
User avatar
simoncrewe
Posts: 200
Joined: Fri Sep 27, 2019 3:45 pm
Has liked: 43 times
Been liked: 36 times
Great Britain

Re: Considering semi-permanent fairing mount

Post by simoncrewe »

HuntWhenever wrote: Tue Jun 15, 2021 3:20 pm I just got a Zumo XT and I am thinking about fabricating a semi-permanent mount on my fairing (FXRT fairing on a Harley Softail). Basic concept as of now is to use the Zumo XT mount and power cable, then make a hood/frame around the unit (probably 3D printed).

For those who have had this GPS unit for a while...any possible issues with having the unit out in the weather and elements on a semi-permanent bases?


20210507.jpg
I would not about the mount being out in the open, it comes with a rubber cap to cover the power lead & you can get a 3 d printed cap to cover the entire mount.
As the other person pointed out, the mounting position needs to be substantial to avoid vibration/blurring of the screen.
HuntWhenever
Posts: 3
Joined: Tue Jun 15, 2021 3:11 pm
United States of America

Re: Considering semi-permanent fairing mount

Post by HuntWhenever »

Good points on the vibration of the fairing. I had not considered that. I checked by feeling the fairing with cruise control on while going down the interstate. It wasn't too bad, but enough to make me consider alternatives.

The fairing mounts to a steel frame on the front of the bike. There are less vibrations on this frame. This may make a good mount point. (Black frame in middle of image below )
20210616_085233.jpg
20210616_085233.jpg (156.14 KiB) Viewed 1164 times
cr0100
Posts: 77
Joined: Tue Apr 21, 2020 4:59 pm
Has liked: 3 times
Been liked: 16 times
United States of America

Re: Considering semi-permanent fairing mount

Post by cr0100 »

The only issue I've experienced with the Zumo "out in the open" on a couple of week-long trips is ... if the rain is coming down VERY heavy (like: downpour), sometimes the water hitting the screen can be interpreted as a finger press. Other than that, I've had mine mounted just above the center stem on my FJR for about a year now. It's protected from wind-blast just by virtue of being behind the windscreen, but it's been rained on for DAYS at a time (no fun riding) with absolutely no issues.

I'd say: Mount it where you're able to see it and interact with it best, and don't worry about the weather.
HuntWhenever
Posts: 3
Joined: Tue Jun 15, 2021 3:11 pm
United States of America

Re: Considering semi-permanent fairing mount

Post by HuntWhenever »

My plans to fabricate a nice mount fell through as work schedules flood my time. I ended up making a quick-'n-dirty aluminum bracket from bent 2"x1/8" flatstock. I put a RAM ball over top part of the bracket just to cover up some of the blan aluminum. A locking mount from Touratech took care of the rest. I few road tests today show that the position, visibility, and legibility are all good.
20210831_201052.jpg
20210831_201052.jpg (241.67 KiB) Viewed 993 times
20210831_201423.jpg
20210831_201423.jpg (288.9 KiB) Viewed 993 times
20210831_201450.jpg
20210831_201450.jpg (247.15 KiB) Viewed 993 times
Post Reply