Hi All
-
- Posts: 2714
- Joined: 19 Oct 2019 16:17
- Location: West Yorkshire, Uk
- Has liked: 351 times
- Been liked: 749 times
Re: Hi All
Welcome. Have fun !!
Have owned Zumo 550, 660 == Now have Zumo XT2, XT, 595, 590, Headache
Use Basecamp (mainly), MyRouteApp (sometimes), Competent with Tread for XT2, Can use Explore for XT - but it offers nothing that I want !
Links: Zumo 590/5 & BC . . . Zumo XT & BC
Use Basecamp (mainly), MyRouteApp (sometimes), Competent with Tread for XT2, Can use Explore for XT - but it offers nothing that I want !
Links: Zumo 590/5 & BC . . . Zumo XT & BC
-
- Subscriber
- Posts: 933
- Joined: 18 Jun 2018 10:14
- Location: North Carolina USA
- Has liked: 101 times
- Been liked: 220 times
Re: Hi All
Hello and welcome to the forum! Lots of good info here.
Russ B. Zumo 595 & XT
2007 & 2013 USA Yamaha FJR1300A
2007 & 2013 USA Yamaha FJR1300A
Re: Hi All
New to the Garmin Zumo XT. Have had a 395lm for about 5 years. Just mounted both on new motorcycles. Not too difficult, but puzzled about my new Zumo XT. Seems to have a mind of its own. Nothing wrong with it, but not sure it is charging off the motorcycle battery. When I turn it off with the button on the back, sometimes I can turn it back on and sometimes to just stays blank? Tested it in the car and it worked off the lighter. Then I charged it on the computer and it works. I worked off the motorcycle battery for a day and then not. Everything else tied to the battery is working. Any tips.
-
- Posts: 2714
- Joined: 19 Oct 2019 16:17
- Location: West Yorkshire, Uk
- Has liked: 351 times
- Been liked: 749 times
Re: Hi All
Welcome to the forums.
With your XT in the bike cradle, the XT should switch itself on when it receives power from the battery.
Does it do that ?
If not test the voltage on the contacts of the cradle - make sure that you are getting power at the two pins. Mine shows 5.21v dc.
If not, check your in-line fuse and your connections to the bike power. If it comes from a fused circuit on the bike, check that fuse as well.
Then its a phone call to Garmin.
With your XT in the bike cradle, the XT should switch itself on when it receives power from the battery.
Does it do that ?
If not test the voltage on the contacts of the cradle - make sure that you are getting power at the two pins. Mine shows 5.21v dc.
If not, check your in-line fuse and your connections to the bike power. If it comes from a fused circuit on the bike, check that fuse as well.
Then its a phone call to Garmin.
Have owned Zumo 550, 660 == Now have Zumo XT2, XT, 595, 590, Headache
Use Basecamp (mainly), MyRouteApp (sometimes), Competent with Tread for XT2, Can use Explore for XT - but it offers nothing that I want !
Links: Zumo 590/5 & BC . . . Zumo XT & BC
Use Basecamp (mainly), MyRouteApp (sometimes), Competent with Tread for XT2, Can use Explore for XT - but it offers nothing that I want !
Links: Zumo 590/5 & BC . . . Zumo XT & BC