Zumo User Forums

MotoTomCC I think you are bypassing an opportunity here. BaseCamp (while not the most intuitive software on the planet) is not overly cumbersome. Once your XT2 connects, it gives a warning which you dismiss as the next step, then it all works great. BaseCamp is the champ when it comes to creating a...

MotoTomCC Seems you have some reading to catch up on. Here's my suggested readings to get you caught up! https://www.zumouserforums.co.uk/viewtopic.php?t=2750 https://www.zumouserforums.co.uk/viewtopic.php?t=2442 https://www.zumouserforums.co.uk/viewtopic.php?t=2804 FYI - I still have not (and prob...

Not sure where in the cycle you are but I got a firmware update notice this morning for my XT2.

Says it is fixing the Sync Great Rides to the Tread App. Brings Unit software version to 4.70.

Good luck to us all!

Thanks for the update. I have not enabled the sync between Tread and the Unit and I'm glad. Luckily I use Basecamp and have no use for tread except for the notifications, the weather, and traffic. But to achieve this you'll have repeat the same steps WITHOUT enabling the syncing of routes between ph...

A couple of suggestions... 1 - Complete reset of XT2 unit. 2 - Removal and reinstall of latest Tread App. This is required as it does some weird stuff to the unit from previous version 3 - Re-pair during setup Try again with all updates in play. If you've done all that before my post, I'm at a loss.

Try turning off the 5GHz wi-fi radio. Sometimes one radio can saturate another. Give that a go. If it works great, if not, turn off the 2.4GHz and try it again. You could try making a GUEST SSID in your router without a password as a temporary measure, same thing. Try 2.4GHz first, then 5GHz to see ...

It also looks that tread app doesn't fuck with the routes from Basecamp and Kurviger anymore :-) I enabled sync again, and test loaded 1 BC route and 2 Kurviger routes, the routes stay the same even after sync with tread-app, no replacements of via or waypoints what I can see, in simulation-mode. H...

To see this setting, the Tread App and the XT2 must be connected to each other. This might be your situation. When your phone and unit are paired, go to Settings --> Devices --> Zumo XT2 --> Finish Setup. You should see the screen shot as shown below. Where you see "Finish Setup" at the t...

Totally agree. My mobile device is Android and I have uninstalled the application and reinstalled it and in the settings it does not appear "to NOT sync my routes" . Did you factory reset your XT2? I can assure you I didn't make up the screen shots. They are real. I would not wax poetic a...

I just now re-loaded the Tread App (Version 2.08.29) back onto my iPhone XR and paired the app to my XT2. I was never, at any stage of the Tread App install for my phone, given an option "to NOT sync my routes" I've once again completely deleted the dreaded 'Tread App" form my iPhone...